.: :, ,:::::::: ::` ::: ::: ,:::::::: ::` ::: ::: .,,:::,,, ::`.:, ... .. .:, .:. ..`... ..` .. .:, .. :: .::, .:,` ,:: ::::::: ::, ::::::: `:::::::.,:: ::: ::: .:::::: ::::: :::::: .:::::: ,:: :::::::: ::, :::::::: ::::::::.,:: ::: ::: :::,:::, ::::: ::::::, :::::::: ,:: ::: ::: ::, ::: :::`::. :::.,:: ::,`::`::: ::: ::: `::,` ::: ::: ,:: ::. ::: ::, ::` :::.:: ::.,:: :::::: ::::::::: ::` :::::: ::::::::: ,:: ::. ::: ::, ::` :::.:: ::.,:: .::::: ::::::::: ::` ::::::::::::::: ,:: ::. ::: ::, ::` ::: ::: `:::.,:: :::: :::` ,,, ::` .:: :::.::. ,,, ,:: ::. ::: ::, ::` ::: ::::::::.,:: :::: :::::::` ::` ::::::: :::::::. ,:: ::. ::: ::, ::` ::: :::::::`,:: ::. :::::` ::` :::::: :::::. ::, ,:: `` :::::::: :::::: `,,` http://www.thingiverse.com/thing:1634969 Nema17 bracket for 2020 Extrusion by ms3dp is licensed under the Creative Commons - Attribution license. http://creativecommons.org/licenses/by/3.0/ # Summary Motor bracket for mounting Nema17 motors on 2020 aluminum extrusion (M5). Designed for the CL-260, as it comes with XY motors mounted outside of the frame. I wanted to move them to the inside, and also wanted to remove the direct motor shaft-rod couplings on XY. The "Y-axis bracket" will actually fit both axis on same hight (like UM2), but the "X-axis bracket" will fit under the y-axis motor mount if this is preferable. I used the "Y-axis bracket" for both XY motors. Nema17 stl borrowed from: http://www.thingiverse.com/thing:871140 2020 extrusion stl borrowed from: http://www.thingiverse.com/thing:1307931 # Print Settings Printer Brand: RepRap Printer: i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.100 Infill: 100