LABCENTER PROTEUS TOOL INFORMATION FILE
=======================================


Photoplotter Setup
------------------
Format: RS274D, ASCII, 2.4, imperial, absolute, eob=*, LZO
Notes:  D=Diameter, S=Side, W=Width, H=Height


NC Drill Setup
--------------
Format: ASCII, 2.4, imperial, absolute, eob=<CR><LF>, no zero suppression.
Notes:  Tool sizes are diameters. Layer sets are in brackets - 0=TOP, 15=BOTTOM, 1-14=INNER.

T01	0.51mm (0-15)
T02	3mm (0-15)
T03	0.76mm (0-15)
T04	1.52mm (0-15)
T05	1.02mm (0-15)
T06	0.89mm (0-15)


[END OF FILE]