DRO VGA
3-AXIS counter with RPM input
This module can simultaneously show three position values and a rpm speed value on every display unit which has a vga input.
Screen overview:
There are four max.8 digit numbers on the basic screen. The top three number are position values -mm-, and the lowest number is rpm speed value -rpm-. All three position values can be relative -REL- or absolute -ABS-, which status is setable with the appropriate -AbsRel- item of the menu.
The absolute value of position and the relative value of position can be set and reset separately with the corresponding -SET- and -RESET- menu item.
The calculated speed bars -mmps- can be seen continously on the right side over the position values.
The corresponding scale resolution is shown on the left side over the position values.
Using the menu:
Displaying the menu is possible by pressing the JOG. When the JOG is pressed the menu is shown with dark green background on the left side of the screen.
Description of menu item functions:
ZERO
Resets the position value.
SET
Sets the position value to a discretional value.
After selecting, an arrow and a SET label indicates the digit position which can be changed by pressing the JOG. When the JOG pressed, the selected digit is increased by one. In case of the EXIT label we can exit from the value setting SET procedure by pressing JOG.
ABSREL
The displayed value can be absolute or relative. This menu items helps to change between the two states.
The -ABS- label or -REL- label on the right side of the position values informs about whether the displayed value is absolute or relative.
SCALE
The linear scale can be set by it. The set value is stored and it is not necessary to change it until the linear scale is changed.
0 menu point
It will double the position change so the displayed value will mean diameter.
TECHNICAL DATA
VIDEO